BBy Bikram Nath·Researched from UK Amazon listings·Updated 2026-09-04·8 products compared
What are the best kitchen taps to buy in the UK?
Our top pick for Kitchen Taps in the UK is the Bristan Dune Kitchen Mixer Tap, Chrome (DU SNK C).
The Bristan Dune is the pick for a straightforward kitchen mixer, and it suits anyone who wants quarter-turn ceramic disc valves, every fitting supplied and a guarantee stated in writing at five years on parts and one on labour. If you want a pull-out spray for filling pans and rinsing a divided bowl, take the DERW instead: it is the only listing that gives the mounting hole range, the spout reach and the worktop thickness it fits, which is what you actually need to know before a tap arrives. On a gravity-fed cylinder, read the pressure notes before ordering either.
Disclosure: As an Amazon Associate I earn from qualifying purchases. This guide contains Amazon affiliate links, and we may earn a commission — at no extra cost to you — but it never changes our rankings.
The Bristan Dune leads this guide because its listing states quarter-turn ceramic disc valves, flexible tails and a fixing kit in the box, and the longest guarantee on this page at five years on parts and one on labour. Kitchen taps are one of the few fittings a UK buyer can get wrong on paper. Most British sinks are drilled with a single 35mm hole for a monobloc tap, so a tap listed for a 33 to 42mm hole will drop straight in and a two-hole tap will not. Water pressure decides the rest. A combi boiler or an unvented cylinder gives mains pressure and suits almost any tap, while a gravity-fed cylinder fed by a loft tank may not push enough through a modern high-arc spout. Two of the listings below say so outright.
Buying guide
What should you look for in Kitchen Taps?
1Measure the tap hole in your sink before you order, because these listings quote different fits: 35mm for the Hapilife, 35 to 38mm for the DERW and 33 to 42mm for the Cobbe.
2Work out what feeds the kitchen first, since a combi boiler or unvented cylinder runs at mains pressure while a gravity-fed cylinder often will not drive a high-arc spout properly.
3If your hot water comes from a loft tank, look for a stated minimum bar figure and treat any listing that says it is not suitable for low pressure as a hard no.
4Check spout height and reach against the window sill or wall cupboard behind your sink, and against the divider on a 1.5-bowl sink.
5Measure the thickness of the worktop or sink deck the tap has to clamp through, as the DERW listing states worktops up to 40mm and the others do not give a figure at all.
6Confirm the flexible tails are included and what size they are, because UK monobloc taps normally connect with half-inch flexible hoses onto 15mm supply pipes.
7Look under your existing sink for isolation valves, since without them the job starts with turning off the stopcock and draining the pipework.
8In a hard water area, favour a tap with a removable aerator so limescale can be soaked off rather than scrubbed.
Our process
How do we choose our picks?
We don’t lab-test products ourselves. Instead we synthesise the strongest independent evidence — current Amazon UK listings, verified-buyer feedback, published specs and UK pricing — into clear, honest recommendations. We earn a commission if you buy through our links, but that never changes which products we rank.
Current UK availability
We only shortlist products actively listed and in stock on Amazon UK, checked against live catalogue data — not last year’s models.
Publicly visible buyer feedback
We look at how each product is received by UK shoppers — its overall rating standing and the praise or complaints that recur in public reviews — rather than relying on a single reviewer’s opinion.
Published specs & value
We compare manufacturer specifications, typical UK price bands, warranty and running costs so each pick is right for a real budget and use-case.
UK-specific fit
We factor in UK voltage, plug/fitting standards, CE/UKCA marking and Consumer Rights Act cover — details that generic global lists miss.
Two UK standard flexible pipes, fittings and instructions
—
—
Two UK standard hoses and an installation manual
Spout
Swivel
—
—
—
—
360° swivel, high arc
Height
—
391mm overall, 182mm to the spout
—
—
15.17in, about 385mm
—
Spout Reach
—
258mm
—
—
9.84in, about 250mm
—
The rankings
The best Kitchen Taps, ranked
1
Bristan
Top Pick
Bristan Dune Kitchen Mixer Tap, Chrome (DU SNK C)
For a plain kitchen mixer you fit once and forget, this listing covers the three things that decide it: ceramic disc valves, the fixings supplied, and a guarantee period written into the listing.
Type
Kitchen mixer tap, model DU SNK C
Finish
Chrome
Valves
Quarter-turn ceramic disc
Spout
Swivel
Included
Flexible tails and fixing kit
Guarantee
5 years parts, 1 year labour
What we like
+Quarter-turn ceramic disc valves are stated for the hot and cold control
+The flexible tails and fixing kit come in the box, so there is nothing extra to order
+A five-year parts and one-year labour guarantee is stated on the listing
+The spout swivels, which helps on a 1.5-bowl sink
Worth noting
–No tap hole diameter, spout reach or minimum pressure is stated, so measure the sink and check the supply first
–The spout swivels but does not pull out, so there is no spray head for rinsing a deep bowl
–The listing says other finishes exist without naming them, so chrome is what this page buys
£53.80Amazon.co.uk price as of 10 Sept, 01:00 (London time). Details
DERW Pull-Out Kitchen Mixer Tap with Three Spray Modes
The one to choose if you want a pull-out spray. It is the only listing here that gives the mounting hole range, the spout reach and the worktop thickness, so you can check it fits before it arrives.
Type
Pull-out mixer, three spray modes
Material
304 stainless steel body, as stated
Height
391mm overall, 182mm to the spout
Spout Reach
258mm
Mounting Hole
35–38mm
Worktop Thickness
Up to 40mm
Warranty
3 years, as stated
What we like
+Full dimensions are given: 391mm overall height, 182mm spout height and 258mm reach
+Fits a 35 to 38mm mounting hole on a worktop up to 40mm thick, with extended fixing pins supplied
+Three settings are described: a non-splash column, a pressurised spray, and a pause that stops the flow mid-task
+The listing states a 304 stainless steel body and a three-year warranty
Worth noting
–The listing cites a 500,000-cycle valve test without saying who carried it out or to what standard
–No minimum water pressure is stated, which matters most for a pull-out spray head
–A pull-out hose and its retracting weight are moving parts that a fixed spout does not have
£33.99£45.99−26%Amazon.co.uk price as of 10 Sept, 01:00 (London time). Details
Hapilife Monobloc Dual Lever Kitchen Mixer Tap, Chrome
For a dual lever tap on mains pressure. The listing is unusually specific about supply: a 35mm tap hole, a 0.5 bar minimum and a plain warning about low pressure, so you know before you order.
Type
Monobloc dual lever mixer
Material
304 stainless steel and brass, as stated
Finish
Chrome
Tap Hole
35mm
Water Pressure
Minimum 0.5 bar, 1 bar for best performance; not suitable for low pressure
Included
Two UK standard flexible pipes, fittings and instructions
What we like
+The listing gives a minimum working pressure of 0.5 bar and recommends one bar, which few taps in this bracket state at all
+Sized for a 35mm tap hole, the usual single-hole drilling on UK sinks
+Described as 304 stainless steel and brass with a built-in aerator to soften the flow
+Two UK standard flexible pipes, the fittings and instructions are included
Worth noting
–The listing states outright that it is not suitable for low pressure, which rules out a gravity-fed cylinder
–No spout height or reach is given, so clearance under a window sill is unknown
–Two handles mean you cannot set temperature and flow with one hand as you can on a single lever
£34.29£49.99−31%Amazon.co.uk price as of 10 Sept, 01:00 (London time). Details
Cobbe Spring Kitchen Mixer Tap with Pull-Out Spray, Chrome
For sinks with an oversized or worn tap hole. It states a 33 to 42mm mounting hole, the widest range on this page, and comes with 600mm half-inch hoses in the box.
Type
Single lever pull-down mixer, two spray modes
Material
Stainless steel with PVD coating, as stated
Finish
Chrome
Mounting Hole
33–42mm
Hoses
Two 600mm hoses with half-inch connections
Spray Head Cover
Free replacement within the first year, as stated
What we like
+A 33 to 42mm mounting hole range, the widest stated on this page, covers sinks with an oversized or worn hole
+Two 600mm hoses with half-inch connections are supplied
+Stream and spray switch from a single button on the head, with a stainless steel hose for the pull-down
+Stated as stainless steel with a PVD coating that resists scratches and fingerprints
Worth noting
–No overall height, spout height or reach is stated, so clearance over a deep bowl is unknown
–No minimum water pressure is stated
–The free replacement described in the listing covers the spray head for one year, not the whole tap
£32.24£45.99−30%Amazon.co.uk price as of 10 Sept, 01:00 (London time). Details
For a mains-pressure kitchen on a combi. The listing names the systems it suits and the ones it does not, gives spout height and reach, and states a ceramic cartridge.
Type
Single handle high-arc pull-down mixer
Finish
Polished chrome
Height
15.17in, about 385mm
Spout Reach
9.84in, about 250mm
Flow Rate
1.5 gpm
Cartridge
Ceramic
Water System
Standard high-pressure systems including combi boilers; not for low-pressure gravity-fed systems or conventional boilers
What we like
+The listing is explicit about supply, naming combi and other high-pressure systems as suitable and gravity-fed ones as not
+Dimensions are given: 15.17in overall, 7.08in spout height and 9.84in reach, with a 1.5 gpm flow rate
+A ceramic cartridge is stated
+The pull-out hose has a docking arm that draws the head back into place, plus a pause button on the head
Worth noting
–It is ruled out for low-pressure gravity-fed systems and conventional boilers, so check what feeds the kitchen first
–The warranty is described only as limited, with no length stated
–Dimensions and flow are quoted in inches and US gallons per minute rather than millimetres and litres
£37.71£45.99−18%Amazon.co.uk price as of 10 Sept, 01:00 (London time). Details
Funime Monobloc Dual Lever Kitchen Sink Mixer Tap, Chrome
For a house with separate hot and cold pipework. The listing states it suits traditional water lines, gives a lead-free solid brass body, and includes UK standard hoses.
Type
Monobloc dual lever mixer, single tap hole
Material
Lead-free solid brass, as stated
Cartridges
Brass disc
Spout
360° swivel, high arc
Supply
Stated as suiting traditional water lines with separate hot and cold
Included
Two UK standard hoses and an installation manual
What we like
+Stated as suitable for traditional water lines with separate hot and cold supplies
+A lead-free solid brass body is stated for the waterway
+The 360° swivel spout is listed as suiting one, one-and-a-half and two-bowl sinks
+Two UK standard hoses and an installation manual are in the box
Worth noting
–No tap hole diameter, spout height or minimum pressure is stated anywhere in the listing
–The cartridges are described as brass disc rather than ceramic disc, and the listing does not say how the two compare
–Two handles mean two cartridges to maintain rather than one
£28.99Amazon.co.uk price as of 10 Sept, 01:00 (London time). Details
GRIFEMA Single Lever Kitchen Mixer Tap with Cold-Start
For anyone who wants a cold-start lever so the boiler does not fire every time a mug is rinsed. Confirm the finish from the listing photos first, because the title and the description disagree.
Type
Single lever mixer with cold-start
Material
Stainless steel, described as lead-free
Spout
360° rotation
Adapter
Half-inch adapter for UK plumbing supplied
Hoses
PEX inlet hoses
Aerator
Removable for descaling
What we like
+A cold-start design is stated, so the lever in its central position draws cold water instead of calling the boiler
+A half-inch adapter for UK plumbing systems is included
+The aerator is removable, which makes descaling straightforward in a hard water area
+PEX inlet hoses and an anti-slip pad for stainless steel sinks are listed as supplied
Worth noting
–The title describes a stainless steel chrome tap while a feature bullet describes a brushed nickel finish, so check the listing images before ordering
–No tap hole diameter, spout reach or minimum water pressure is stated
–No warranty length is given on the listing
£27.42Amazon.co.uk price as of 10 Sept, 01:00 (London time). Details
Worth a look only if you are content to read a German-language listing. The stated left, centre or right handle position is the genuinely useful part on an awkward sink run.
Type
Pull-out mixer with swivel spout
Material
SUS 304 stainless steel with an ABS spray head, as stated
Finish
Brushed
Handle
Can be fitted left, centre or right
Aerator
Removable
Warranty
3 year limited, as stated
What we like
+The handle can be mounted on the left, in the centre or on the right, which helps in a tight run beside a wall
+A SUS 304 stainless steel body with a removable aerator is stated
+The pull-out head is described with jet, spray and pause settings
+A three-year limited warranty is stated
Worth noting
–The feature bullets on this listing are written in German, so a UK buyer cannot check the detail in English before ordering
–The title says two spray modes while the bullets describe three, including a pause
–No tap hole diameter, dimensions or minimum water pressure is stated
£29.85£42.89−30%Amazon.co.uk price as of 10 Sept, 01:00 (London time). Details
Product prices and availability are accurate as of 10 Sept, 01:00 (London time) and are subject to change. Any price and availability information displayed on Amazon.co.uk at the time of purchase will apply to the purchase of this product.
Editor's Note
Kitchen taps rarely fail at the body. It is the cartridge that starts to weep, the pull-out hose that stiffens where it rubs the cabinet, and the aerator that furs up with limescale, which affects most of southern and eastern England. That is why a stated guarantee and a removable aerator matter more than the name of the finish. Moving up through these listings buys ceramic disc valves, a named guarantee period and stated dimensions. What the listings routinely leave out is the minimum working pressure, and that is the single figure that decides whether a tap works in your house.
Our Take
We can tell you what these listings state and where they go quiet, and with kitchen taps the quiet parts are the ones that bite: minimum pressure, spout reach and tap hole size are missing more often than not. We cannot tell you how a lever feels or how the flow sounds in a steel sink. If your supply is gravity-fed or your sink sits in an awkward run, a plumbers' merchant will let you handle the tap first.
Questions & answers
Frequently asked questions
What size tap hole do UK kitchen sinks have?
Most UK kitchen sinks are drilled with a single 35mm hole for a monobloc tap. The taps here state what they fit: the Hapilife lists a 35mm hole, the DERW a 35 to 38mm range and the Cobbe a 33 to 42mm range. Measure the hole in your own sink before ordering, because a tap body narrower than the hole needs a cover plate to sit properly.
Will these kitchen taps work with low water pressure?
Not reliably. The Hapilife listing states a minimum of 0.5 bar, one bar for best performance, and says it is not suitable for low pressure. The FORIOUS listing says it is designed for standard high-pressure systems including combi boilers, and not for low-pressure gravity-fed systems or conventional boilers. If your hot water comes from a cylinder fed by a loft tank, look for a tap sold specifically as low pressure.
Can I fit a kitchen tap myself or do I need a plumber?
Most monobloc taps are sold as a DIY job, and most of these listings include flexible tails and instructions, though what else is in the box varies. It is still plumbing: you need isolation valves or a working stopcock, room to reach the back nut behind the sink, and a plan for corroded old connections. If there are no isolation valves, or the pipework would have to be cut and rejoined, book a plumber.
What is the difference between a single lever and a dual lever kitchen tap?
A single lever mixes hot and cold from one handle, so temperature and flow can be set with a wet hand or an elbow. A dual lever has separate hot and cold handles, which suits a traditional kitchen and gives finer control of each side. Both types here are monobloc, meaning one body through one tap hole. The Hapilife and Funime listings state dual lever; the GRIFEMA, FORIOUS and Cobbe state a single one.
Are pull-out kitchen taps worth having?
They earn their place if you fill large pans, rinse a deep bowl, or use a 1.5-bowl sink where the divider gets in the way of a fixed spout. The DERW, Cobbe, FORIOUS and Baollansa listings all state a pull-out or pull-down spray head with stream and spray settings. The trade-off is the hose and its retracting weight, which are moving parts a fixed swivel spout does not have.
How do I stop limescale building up on a kitchen tap?
Wipe the spout dry after use and descale the aerator, the small screen at the tip of the spout where scale collects first and where flow drops off. The GRIFEMA and Baollansa listings both state a removable aerator for cleaning. In a hard water area expect to unscrew and soak it every few months, so check that a tap's aerator comes out before you buy.
Affiliate disclosure: As an Amazon Associate I earn from qualifying purchases. UKPicks earns a small commission from qualifying purchases made via links on this page. This does not affect our editorial recommendations or the price you pay.
